View SPS-2340WG_566624.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Optoway
SPS-2340WG
FEATURES DESCRIPTION
SPS-2340WG
1
***********************************************************************************************************************************************************************
(RoHS Compliant)
10.3 Gb/s / 40 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
l l l l l l l l l l l l
Support 9.95 Gbps to 10.5 Gbps Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-ER SFF-8472 Digital Diagnostic Function Temperature-stabilized 1550 nm EML Transmitter Distance up to 40 km at SM Fiber AC/AC Coupling according to MSA Single +3.3 V Power Supply Low Power consumption (max. 1.5W) RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant
The SPS-2340WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-ER/EW and 10G FC. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (EML) and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
APPLICATIONS
l 10GBASE-ER/EW l 40 km 10G Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
ORDER INFORMATION
P/No. Bit Rate (Gb/s) 10.3 10GBASE ER / EW Distance (km) 40 Wavelength (nm) 1550 EML Package SFP+ with DMI Temp. (oC) 0 to 70 RoHS Compliant Yes
SPS-2340WG
Absolute Maximum Ratings
Parameter Storage Temperature Relative Humidity Operating Case Temperature Power Supply Voltage Receiver Input Optical Power Symbol Tstg RH Topr Vcc Mip Min -40 5 0 -0.5 Max 85 85 70 3.6 3 Units o C % o C V dBm Notes Non-condensing
Average power
Recommended Operating Conditions
Parameter Power Supply Voltage Operating Case Temperature Relative Humidity Power Supply Current Data Rate Total Power Dissipation Symbol Vcc Topr RH ICC (TX+RX) Min 3.135 0 5 Typ 3.3 85 320 10.3125 Max 3.465 70 % 450 10.5 1.5 Units / Notes V o C Non-condensing mA Gb/s W/1
Note 1: The inrush current is TBD.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Transmitter and Dispersion Penalty Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA c SMSR ER RIN TDP Min -4.7 -1.7 1530 30 3.0 -128 3 -30 Typ Max +4.0 1565 1 Units dBm nm nm dB dB/Hz dB dBm
SPS-2340WG
Notes 2
2
***********************************************************************************************************************************************************************
-20 dB width
2. Output power is power coupled into a 9/125 m single-mode fiber.
Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Sensitivity in Average Power Receiver Sensitivity in OMA Stressed Receiver Sensitivty in OMA Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen1 Sen2 Min Typ Max -15.8 -14.1 -11.3 Units dBm dBm dBm dBm dBm dBm nm Notes 3
P MAX LOSD LOSA c
-1 ---28 1530
-------
-16 --1565
Transition: low to high Transition: high to low
3. BER < 10 -12 and PRBS 231-1 at 10.3125 Gb/s..
Electrical Characteristics
Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 10.3125 100 120 10.3125 100 340 Max 10.5 820 10.5 850 Units Gb/s mVpp Gb/s mVpp Notes
Internally AC coupled
Internally AC coupled
2.0 GND 2.4 GND
Vcc+0.3 0.8 Vcc 0.5
V V V V
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
CONNECTION DIAGRAM
SPS-2340WG
3
***********************************************************************************************************************************************************************
PIN Signal Name
1 2 VEET TX_Fault
Description
Transmitter Signal Ground Transmitter Fault Indication. Logic "1" Output = Laser Fault. Logic "0" Output = Normal Operation Logic "1" Input (or no connection) = Laser off, Logic "0" = Laser on. Modulation Definition 2 - Two wires serial ID Interface Modulation Definition 1 - Two wires serial ID Interface Modulation Definition 0 - Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground
PIN Signal Name
11 12 VEER RD-
Description
Receiver Signal Ground Inverse Receiver Data Out
3 4 5 6 7
TX_Disable SDA SDL MOD-ABS RS0
13 14 15 16 17
RD+ VEER VCCR VCCT VEET
Receiver Data Out Receiver Signal Ground Receiver Power - 3.3V5% Transmitter Power - 3.3V5% Transmitter Signal Ground
8 9
RX_LOS RS1
18 19
TD+ TD-
Transmitter Data In Inverse Transmitter Data In
10
VEER
20
VEET
Transmitter Signal Ground
MODULE DEFINITION
Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 2 10 K TD + 18 Z=50 TD 19 Z=50 Vcc T 16 0.1F 4 .7 H Vcc 3.3V 22 F 0.1F 0.1F Vcc R 15 0.1F 22 F 4 .7 H TD TD +
SPS-2340WG
4
***********************************************************************************************************************************************************************
Tx_DISABLE Tx_FAULT
LD D river
100
SerDes IC
Protocol IC
RD -
12 Z=50 100
RD -
POST Amp
RD +
13 Z=50 10 K
RD +
depending on SE D S RE
LOSS OF SINGAL
LOS Vee R RS1 30K 30K MOD_ABS RS0
8 ( 10,11,14) 9 7 TX Rate Select RX Rate Select
6 5 4 10 K 10 K 10 K Vcc 3.3V
MODU LE DETECT SCL SDA
EEPROM
SCL SDA
SFP+ module
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
EEPROM Series ID Memory Contents (Address A0h)
Addr. Hex ASCII 0 03 1 04 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 07 80 00 00 00 10 10 01 C0 06 69 00 28 FF 00 00 00 00 4F 50 54 4F 57 41 59 20 20 20 20 20 Note SFP+ Addr. Hex ASCII 32 20 33 20 20 20 00 00 0E FA 53 50 53 2D 32 33 34 30 57 47 20 20 20 20 20 20 30 30 30 30 06 0E 00 Addr. Hex ASCII Note 64 06 Cooled Tx, Power Level 2, 65 1A Txdis, Txfault, LOS enable 66 00 Up bit rate 67 00 Low bit rate NA 68 Serial number: each piece with Vendor IEEE 69 different serial OUI 70 number 71 Part Number 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Revision, 88 depended on 89 version 90 91 1550 nm 92 93 Reserved 94 Checksum 0-62 95 Note
SPS-2340WG
Addr. Hex ASCII 96 00 97 00 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 Date Code 117 118 119 120 121 122 123 Monitoring 124 Soft Control 125 SFF-8472V10.4 126 Checksum 64-94 127 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Note Vendor specific EEPROM
5
***********************************************************************************************************************************************************************
34 35 36 37 38 Long Distance (L) 39 Longwave Laser 40 (LL) Single Mode 41 (SM) 1200 / 800 42 Mbytes/sec 64B/66B 43 10.5Gbps 44 45 40km 46 >25.4km 47 48 49 50 51 O Vendor name 52 P 53 T 54 O 55 W 56 A 57 Y 58 59 60 61 62 63
LC 10G Base-ER
S P S 2 3 4 0 W G
0 0 0 1
68 F0 04
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
EEPROM Series ID Memory Contents (Address A2h)
Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex Note 4B Temp. High Alarm (75oC) 00 FB Temp. Low Alarm(-5oC) 00 46 Temp. High Warming(70 oC) 00 00 Temp. Low Warming (0 oC) 00 8C Voltage High Alarm (3.6V) A0 75 Voltage Low Alarm(3.0V) 30 88 Voltage High Warming(3.5V) B8 79 voltage Low Warming (3.1V) 18 EA Tx Bias High Alarm(120mA) 60 27 Tx BiasLow Alarm(20mA) 10 D6 Tx Bias High Warming(110mA) D8 3A Tx Bias Low Warming(30mA) 98 7B Tx Power High Alarm (5dBm)) 87 0A Tx Power Low Alarm(-5.7dBm) 84 62 Tx Power High Warming(4dBm) 1F 0D Tx Power Low 3C Warming (-4.7dBm) Addr. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
SPS-2340WG
6
***********************************************************************************************************************************************************************
Hex Note Addr. Hex Note Addr. Hex Note 27 Rx Power High 64 00 For External Cal. 96 Real Time Temp. MSB Alarm (0dBm) 65 00 For External Cal. 97 Real Time Temp. LSB 10 00 Rx Power Low 66 00 For External Cal. 98 Real Time Vcc MSB A6 Alarm (-17.8dBm) 67 00 For External Cal. 99 Real Time Vcc LSB Real Time Tx Bias MSB 1F Rx Power High 68 3F For External Cal. 100 Real Time Tx Bias LSB 07 Warming (-1dBm) 69 80 For External Cal. 101 Real Time Tx Pwr MSB 01 Rx Power Low 70 00 For External Cal. 102 Real Time Tx Pwr LSB 07 Warming(-15.8dBm) 71 00 For External Cal. 103 00 Reserved 72 00 For External Cal. 104 Real Time Rx Pwr MSB Real Time Rx Pwr LSB 00 Reserved 73 00 For External Cal. 105 00 Reserved 74 00 For External Cal. 106 Reserved 00 Reserved 75 00 For External Cal. 107 Reserved 00 Reserved 76 01 For External Cal. 108 Reserved 00 Reserved 77 00 For External Cal. 109 Reserved Tx Dis, Tx Fault, Rx Los 00 Reserved 78 00 For External Cal. 110 00 Reserved 79 00 For External Cal. 111 Reserved 00 Reserved 80 01 For External Cal. 112 Alarm Flag 00 Reserved 81 00 For External Cal. 113 Alarm Flag/Reserved 00 Reserved 82 00 For External Cal. 114 Reserved 00 Reserved 83 00 For External Cal. 115 Reserved 00 Reserved 84 01 For External Cal. 116 Warming Flag 00 Reserved 85 00 For External Cal. 117 Warming Flag/Reserved 00 Reserved 86 00 For External Cal. 118 Reserved 00 Reserved 87 00 For External Cal. 119 Reserved Vendor Specific 00 For External Cal. 88 01 For External Cal. 120 00 For External Cal. 89 00 For External Cal. 121 00 For External Cal. 90 00 For External Cal. 122 00 For External Cal. 91 00 For External Cal. 123 00 For External Cal. 92 00 For External Cal. 124 00 For External Cal. 93 00 For External Cal. 125 00 For External Cal. 94 00 For External Cal. 126 00 For External Cal. 95 Check Sum 127 Note: Address 128 - 247: customer R/W eeprom. Address 248 - 255: Vendor Specific.
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0
Optoway
REVISION HISTORY
Version
1.0 Initial datasheet
SPS-2340WG
7
***********************************************************************************************************************************************************************
Subject
Release Date
2010/4/1
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
4/1/2010 V1.0

▲Up To Search▲

Price & Availability of SPS-2340WG

	To Download SPS-2340WG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .